Floor mat manufacturers tell us that the hall floor mat […]
Floor mat manufacturers tell us that the hall floor mats are generally in the ground pits, and the pits in the venues are basically with drainage grooves.
For pits with drainage grooves, high-pressure water guns can be used to flush directly, so that all the sand on the surface of the mat can be removed. If there is no drainage groove, you need to use a single wiper together and use a water suction machine to absorb the water. You can use a vacuum cleaner to vacuum at least twice a week. Make an upright vacuum cleaner and vacuum clean.
After snowing, you can use a water suction machine to absorb the snow on the surface of the floor mat, and then use a vacuum cleaner to clean the floor mat. Only good protection of the floor mat hygiene and attention to maintenance can make the floor mat have a long service life.
When the weather is good, you need to take out more to bask in the sun for sterilization, because the floor mats are placed indoors for a long time. If they encounter humid air, they are easy to mold. Dry it immediately after washing to keep it dry. If you accidentally get mimeograph, paint or soup, you must wash it immediately to ensure it is clean and prevent peculiar smell. When cleaning, make sure that all the residues of the cleaning agent have been rinsed, and after cleaning, they should be dried in time.
Just like daily care, shake off the dust on the floor mat and rinse with a high-pressure water pipe. It is best to rinse with a water temperature below 40 degrees Celsius. You can use a small neutral detergent instead of acid-alkaline detergent. It will accelerate the aging of the floor mat.